Apache2Triad Help, Support and Development Forum Index Search Profile Log in to check your private messages Log in Register Memberlist Attachments Statistics Crew/Ranks Archive
 How to setup virtual hosts with SSL?
Google
Post new topic Reply to topic
Author Message
jhendrix
 
 


Joined: 10 Mar 2005
Posts: 4

PostPosted: Wed Mar 16, 2005 10:40 pm Reply with quoteBack to top

Hi all,

I got virtual hosts working perfectly. Now I want to set it up with SSL enabled.

I looked into the ssl.conf but I cannot figure it out. Does anybody have an idea how to setup virtual host with SSL?

Thanks in advance.

Joep
View user's profileSend private message
Vlad Alexa Mancini
lead developer
lead developer


Joined: 07 Jul 2003
Posts: 1539

PostPosted: Thu Mar 17, 2005 7:42 am Reply with quoteBack to top

for each virtualhost entry like

Quote:
<VirtualHost 127.0.0.1>
ServerName example.com
ServerAdmin webmaster@example.com
DocumentRoot C:\docume~1\example\public_html
ServerAlias www.example.com example.com
ErrorLog C:\apache2triad\logs\error_example.com
CustomLog C:\apache2triad\logs\access_example.com combined
ScriptAlias /cgi-bin/ C:\docume~1\example\public_html\cgi-bin\
</VirtualHost>


you would have to add a ssl virtualhost like :

Quote:
<IfDefine SSL>
<VirtualHost 127.0.0.1:443>
ServerName example.com
ServerAdmin webmaster@example.com
DocumentRoot C:\docume~1\example\public_html
ErrorLog C:\apache2triad\logs\ssl_error_example.com
CustomLog C:\apache2triad\logs\ssl_access_example.com "%t %{version}c %{cipher}c %{clientcert}c"
SSLEngine on
SSLCertificateFile C:\apache2triad\opssl\cert\example.com.crt
SSLCertificateKeyFile C:\apache2triad\opssl\cert\example.com.key
UserDir public_html
ScriptAlias /cgi-bin/ C:\docume~1\example\public_html\cgi-bin\
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
</VirtualHost>
</IfDefine>


Last edited by Vlad Alexa Mancini on Thu Mar 17, 2005 1:35 pm; edited 2 times in total
View user's profileSend private message
jhendrix
 
 


Joined: 10 Mar 2005
Posts: 4

PostPosted: Fri Mar 25, 2005 1:32 pm Reply with quoteBack to top

I implemented the directives you suggested, but now all https requests result into the first virtual host in the <IfDefine SSL> section.

Any ideas?

Cheers,

Joep
View user's profileSend private message
Vlad Alexa Mancini
lead developer
lead developer


Joined: 07 Jul 2003
Posts: 1539

PostPosted: Fri Mar 25, 2005 3:10 pm Reply with quoteBack to top

fix your virtualhosts in that case because that means that your first virtualhost always matches http://httpd.apache.org/docs/vhosts/examples.html
View user's profileSend private message
tantons
 
 


Joined: 27 Apr 2005
Posts: 2

PostPosted: Wed Apr 27, 2005 6:47 pm Reply with quoteBack to top

Hello First off, I want to say you guys have a great product. it was very well done. I am new to this site. so if this question has already been posted I was not able to find it. I tried the above example with named based hosting and I keept getting errors when starting Apache with the script. Here is a copy of the script if anyone can help I would be greatfull!!!

<IfDefine SSL>
<VirtualHost *:443>
ServerName class.sfhpro.com
ServerAdmin webhost@sfhproductions.com
DirectoryIndex index.html index.php index.html.var index.htm default.htm
DocumentRoot "C:\apache2triad\htdocs\class\online"
ErrorLog logs/sfhpro.com-error_log
CustomLog logs/sfhpro.com-access_log common
SSLEngine on
SSLCertificateFile C:\apache2triad\opssl\cert\certificate.crt
SSLCertificateKeyFile C:\apache2triad\opssl\cert\sfhpro.com.key
UserDir public_html
ScriptAlias /cgi-bin/ C:\apache2triad\htdocs\cgi-bin
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown
</VirtualHost>
</IfDefine>

Thanks
View user's profileSend private message
Vlad Alexa Mancini
lead developer
lead developer


Joined: 07 Jul 2003
Posts: 1539

PostPosted: Fri Apr 29, 2005 7:14 pm Reply with quoteBack to top

Thanks , but don't you think a "copy" of the errors would be usefull too ?
View user's profileSend private message
tantons
 
 


Joined: 27 Apr 2005
Posts: 2

PostPosted: Fri Apr 29, 2005 10:06 pm Reply with quoteBack to top

Sorry. The only Error I recevie when I try to start Apache ssl is the requested operation failed!
Thanks
Todd
View user's profileSend private message
elflojo
 
 


Joined: 20 Jun 2005
Posts: 3

PostPosted: Mon Jun 20, 2005 6:02 am Reply with quoteBack to top

Where you able to fix this problem ? Im having the same problem and error :S
________
Defender


Last edited by elflojo on Mon Jan 31, 2011 7:53 pm; edited 1 time in total
View user's profileSend private message
Joshua Meadows (DemoRic)
support
support


Joined: 29 Dec 2004
Posts: 783
Location: S.E. Kansas

PostPosted: Tue Jun 21, 2005 1:58 am Reply with quoteBack to top

Try testing your apache with ssl configuration.

Change your default apache to ssl.
Code:
start -> run -> services.msc

left-click 'Apache2Triad Apache2 Service' and then hit the stop (stop service) button
right-click on 'Apache2Triad Apache2 Service'
select properties
change startup type to disabled

right-click on 'Apache2Triad Apache2 Service with SSL'
select properties
change startup type to automatic
hit the play (start service) button


Since your getting an error this probably won't work so you'll want to...

Test your config:
Code:
start -> run -> cmd.exe
type C:\apache2triad\bin\apache -t


It'll tell you which line to check for an error. This is approxamate so you'll want to check a few lines before and after, but usually it tells you the EXACT line where the error is.
View user's profileSend private messageYahoo MessengerICQ Number
DJA
 
 


Joined: 08 Sep 2005
Posts: 2

PostPosted: Thu Sep 08, 2005 10:10 pm Reply with quoteBack to top

Im having the same problems, and when I try to start it it doesn't work comes with same error, and when I run check it says santax OK:



# The Apache2Triad ssl config file.
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs-2.0/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
#

#
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#
# Note: This must come before the <IfDefine SSL> container to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
#
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random 512
#SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
#SSLRandomSeed connect file:/dev/urandom 512

<IfDefine SSL>

#
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
#
# Note: Configurations that use IPv6 but not IPv4-mapped addresses need two
# Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443"
#
Listen 443

##
## SSL Global Context
##
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
##

#
# Some MIME-types for downloading Certificates and CRLs
#
AddType application/x-x509-ca-cert .crt
AddType application/x-pkcs7-crl .crl

# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is a internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin

# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache none
#SSLSessionCache shmht:logs/ssl_scache(512000)
#SSLSessionCache shmcb:logs/ssl_scache(512000)
SSLSessionCache dbm:logs/ssl_scache
SSLSessionCacheTimeout 300

# Semaphore:
# Configure the path to the mutual exclusion semaphore the
# SSL engine uses internally for inter-process synchronization.
#SSLMutex file:logs/ssl_mutex
SSLMutex default
#SSLMutex sem

##
## SSL Virtual Host Context
##

<VirtualHost _default_:443>

# General setup for the virtual host
DocumentRoot "C:/apache2triad/htdocs"
ServerName localhost:443
ServerAdmin admin@localhost
ErrorLog logs/ssl_error.log
TransferLog logs/ssl_access.log

# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on

# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP:+eNULL

# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
SSLCertificateFile "C:/apache2triad/OpSSL/cert/ssl.crt"


# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile "C:/apache2triad/OpSSL/cert/ssl.pem"


# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convinience.
#SSLCertificateChainFile "C:/apache2triad/OpSSL/cert/sub.ca.crt"

# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificateFile "C:/apache2triad/OpSSL/cert/ca.crt"

# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded)
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificateFile "C:/apache2triad/OpSSL/cert/ca-bundle.crl"

# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10

# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>

# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o CompatEnvVars:
# This exports obsolete environment variables for backward compatibility
# to Apache-SSL 1.x, mod_ssl 2.0.x, Sioux 1.0 and Stronghold 2.x. Use this
# to provide compatibility to existing CGI scripts.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +CompatEnvVars +StrictRequire
<Files ~ "\.(pl|cgi|shtml|phtml|php3?)$">
SSLOptions +StdEnvVars
</Files>
<Directory "C:/apache2triad/cgi-bin">
SSLOptions +StdEnvVars
</Directory>

# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is send or allowed to received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0

# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request.log \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"

</VirtualHost>

</IfDefine>

I just used their config (since I AM I newB) and edited the names to my own, I had the certifacate signed by https://cert.startcom.org/
View user's profileSend private message
Display posts from previous:      
Post new topic Reply to topic


 Jump to:   



View next topic
View previous topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
Powered by phpBB © 2001, 2002 phpBB Group :: FI Theme
All times are GMT