Author |
Message |
gr8sale

Joined: 14 Mar 2007
Posts: 3
Location: Miami, FL
|
Posted:
Wed Mar 14, 2007 2:55 am |
  |
My old laptop fried and I had to get a new one, my new one came with windows vista. Apache2triad installed with no problems. But now I cannot start the apache http server. Not with the apache2triad manager, not with apache monitor, not in the widows services panel, and all of the other apache2triad services seem to be operating normally. I really need to get this working so that I can use it for some web development I need to finish. I have looked around the web and can't find an answer to this issue, if anyone has a solution or suggestion I would greatly appreciate it.
thanks,
Stephanie |
|
|
  |
 |
lku homer

Joined: 29 May 2006
Posts: 104
|
Posted:
Wed Mar 14, 2007 4:54 am |
  |
Check the error log, if there is any errors post them here. Look in the 'C:\a2t\logs\error.txt'. |
|
|
      |
 |
gr8sale

Joined: 14 Mar 2007
Posts: 3
Location: Miami, FL
|
Posted:
Wed Mar 14, 2007 3:02 pm |
  |
When trying to start the service from the a2t manager I get these messages:
From A2T:
Failed to set data for 'Start'
From Windows:
Apache HTTP Server stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is available.
In the services panel:
Windows could not start the A2T service on the local computer. Error 1053: the service did not respond to the start or control request in a timely fashion.
Here is my error log:
[Tue Mar 13 23:03:24 2007] [notice] Apache/2.2.0 (Win32) PHP/5.1.2 configured -- resuming normal operations
[Tue Mar 13 23:03:24 2007] [notice] Server built: Dec 11 2005 20:34:33
[Tue Mar 13 23:03:24 2007] [notice] Parent: Created child process 2596
[Tue Mar 13 23:03:25 2007] [notice] Child 2596: Child process is running
[Tue Mar 13 23:03:25 2007] [notice] Child 2596: Acquired the start mutex.
[Tue Mar 13 23:03:25 2007] [notice] Child 2596: Starting 150 worker threads.
[Tue Mar 13 23:03:25 2007] [notice] Child 2596: Starting thread to listen on port 80.
[Tue Mar 13 23:07:48 2007] [notice] Parent: Received shutdown signal -- Shutting down the server.
[Tue Mar 13 23:07:48 2007] [notice] Child 2596: Exit event signaled. Child process is ending.
[Tue Mar 13 23:07:49 2007] [notice] Child 2596: Released the start mutex
[Tue Mar 13 23:07:50 2007] [notice] Child 2596: Waiting for 150 worker threads to exit.
[Tue Mar 13 23:07:50 2007] [notice] Child 2596: All worker threads have exited.
[Tue Mar 13 23:07:50 2007] [notice] Child 2596: Child process is exiting
[Tue Mar 13 23:07:50 2007] [notice] Parent: Child process exited successfully.
Any help is greatly appreciated
Thanks in advance,
Stephanie |
|
|
  |
 |
dale

Joined: 11 Jun 2006
Posts: 51
Location: las vegas, nv
|
Posted:
Thu Mar 15, 2007 3:44 am |
  |
Which version of windows vista do you have? I am researching the new world of windows vista to see what it can and can't do. |
|
|
  |
 |
Vlad Alexa Mancini
lead developer

Joined: 07 Jul 2003
Posts: 1539
|
Posted:
Fri Mar 16, 2007 1:10 pm |
  |
looks like apache started normaly and was imiediately automatically shut down , am sorry but for now i have no access to a vista box or any vista testers |
|
|
  |
 |
Lucifix

Joined: 16 Mar 2007
Posts: 1
|
Posted:
Fri Mar 16, 2007 11:31 pm |
  |
I haven't try yet but maybe this will help:
http://www.sitepoint.com/forums/showthread.php?t=409782
Quote: | I had the same problems with installing Apache on Vista.
First of all, I turned off User Account Control:
1. Start > Control Panel
2. User Accounts
3. Click "Turn User Accounts Control on or off" Link.
4. Uncheck "Use Uer Account Control" Box
5. Click OK
6. Restart Windows
I then downloaded the MSI Apache installer version from Apache.org, and saved it to my desktop. I then renamed the file to apache.msi
I then ran the installer through the command prompt running in Administrator mode:
1. Start > All Programs > Accessories
2. Right-Click "Command Prompt" and choose "Run as Administrator"
3. Change to your desktop folder (usually cd desktop)
4. Type the following: "msiexec /i apache.msi"
5. Run through the Apache installer as normal.
After Apache had been installed and I had restarted my machine, I wanted to get rid of the annoying red error box that appears. This is due to the "Monitor Apache Services" program trying to load at startup.
Delete it from the startup folder of the start menu (Start > All Programs > Startup)
You should then be able to start and stop Apache using the icons in the start menu under the Apache > Control Apache Server folder. Better still, why not make a shortcut to them on your desktop for easier access. |
Edited: nope, I tried but it doesn't work... |
|
|
  |
 |
gr8sale

Joined: 14 Mar 2007
Posts: 3
Location: Miami, FL
|
Posted:
Tue Mar 20, 2007 3:34 pm |
  |
didn't work for me either
i just get an error message from windows
thanks though
Stephanie |
|
|
  |
 |
Joshua Meadows (DemoRic)
support

Joined: 29 Dec 2004
Posts: 783
Location: S.E. Kansas
|
Posted:
Fri Mar 23, 2007 3:56 pm |
  |
Sorry I don't have VISTA to see if this works, but it's worth a shot.
1. Start > Control Panel
2. User Accounts
3. Click "Turn User Accounts Control on or off" Link.
4. Uncheck "Use Uer Account Control" Box
5. Click OK
6. Restart Windows
Please note: I've read that it may still give an error message on startup, but will actually start the service.
Also, I've read you may have to disable UAC first and then install apache. |
|
|
    |
 |
DELETED
Guest
|
Posted:
Sun Apr 29, 2007 10:03 pm |
  |
|
|
 |
Dino

Joined: 28 Jul 2006
Posts: 2
Location: Iowa
|
Posted:
Fri May 11, 2007 2:21 pm |
  |
I found this work around online. It works, Apache2Triad starts with windows, but, It does throw an error message at startup. Other than that, everything seems to work okay for me. I'm not sure that I would do this on a public server, but for testing on my laptop it's fine. Just as a side note: the problems I had installing A2T were at the cmd promt asking for the password, my keyboard was disabled and I was unable to type a password. 'Enter' allowed me to go on by. Then A2T wood not run as stated in the posts above. |
|
|
  |
 |
TheGoldeagle

Joined: 07 May 2005
Posts: 1
|
Posted:
Sat May 19, 2007 6:42 pm |
  |
Doing all of the above I still get errors that prevent me from running A2T
Quote: | (OS 10013)An attempt was made to access a socket in a way forbidden by its acces
s permissions. : make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs |
Any ideas on this?
I am runing Windows Vista Home Premium.
Medalink |
|
|
  |
 |
DELETED
Guest
|
Posted:
Fri Jun 01, 2007 6:27 pm |
  |
|
|
 |
elpresidente

Joined: 03 Aug 2004
Posts: 6
|
Posted:
Thu Aug 16, 2007 10:19 pm |
  |
confirmed that setting the "log on" property to of the Apache2 service works. |
|
|
  |
 |
DELETED
Guest
|
Posted:
Thu Dec 27, 2007 6:48 pm |
  |
|
|
 |
|